Mamiya M645 - Page 22

O
Removing
the
focusing
screen
Lift
up
the focusing
screen
using
the
two
focusing
screen lugs
(2).
o
Attaching
the Focusing
Screen
Insert
the two
tabs
of the focusing
screen
into
the
slots
at
the
back
of the
opening in
the
camera top
and
press
lightly
so
that
the
screen
clicks into
place.
rThe
rcar
surface
of
the focusing
screen
is
made
of
plastic
so
use
care to
prevent
scratches
when
removing
and
attaching.
All
of
the finders
are attiached
and
removed
in
the
same way,
except
for
the AE
Prism
Finder which
is removed
by
a different
method.
Prior
to
attaching the
finder
to
the
camera,
confirm that
the white
dot
on
the
f
inder release
button is
pointing
upward
lf
the
white
dot on
the
button is
aligned
with
the white
dot on
the
finder,
by de-
pressing
the
button
and
removing
your
finger
from
it, the
white
dot on the
but-
ton
will
automatically
point
upward In
this
condition, the
button cannot
be de-
pressed;
consequently,
the finder
will
not
be
accidentally
detached
from
the
camera.
o
Attaching
Finders
,f
Place the rear
part
of
the
finder
on
the
camera body
while
holding the
front
part
of
the finder
slightly upward.
Slide
the rear
part
forward
until it
stops
and
gently
lower
the front
part
of
the finder
on
to the
camera body.
lt will then lock
into
place.
20
www.orphancameras.com