Need help?Do you have a question about the Mamiya RB67 Pro S and is the answer not in the manual?
General| Lens Mount | Mamiya RB Mount |
|---|---|
| Film Advance | Manual |
| Type | SLR |
| Shutter Speeds | 1/400s to 1s, Bulb |
| Metering | None built-in (optional external prism meters available) |
| Focus | Manual |
| Camera Format | Medium Format |
Details about the camera body type, lens mount, viewfinder, and focusing hood.
Lists Mamiya Sekor lenses, filter diameter, aperture, and shutter details.
Information about the film used, negative size, film advance, and counter.
Discusses the benefits of the 6x7 format for image quality and enlargements.
Highlights the parallax-free focusing and bright viewing experience of SLR cameras.
Praises the image rendition and color balance of Mamiya Sekor lenses.
Explains the lens-shutter system's synchronization with flash for better photos.
Details interlocking mechanisms preventing double exposures and allowing multiple exposures.
Describes the revolving adapter's function for easy format switching on a tripod.
Details the mechanism that minimizes mirror shock in the camera.
Explains the benefit of mirror-up photography for sharp images in specific shooting conditions.
Describes close-up capabilities using the extended bellows for macro photography.
Explains the lever for cocking the shutter and mirror, with a safety device.
Describes the dark slide's function and its safety interlock with the shutter release.
Details the lock ring that prevents accidental shutter release.
Explains the shutter release button and its safety interlocks.
Points out the red dot for lens mounting alignment.
Explains the ring used to attach and secure lenses to the camera body.
Describes the focusing hood's single-action opening and closing mechanism.
Mentions interchangeable focusing screens and their format index.
Identifies the knob used for focusing the camera.
Explains the lever that locks the focusing knob.
Step-by-step guide for mounting a lens onto the camera body.
Instructions on how to cock the camera body mirror.
Steps for cocking the shutter on the attached lens.
Procedure for detaching a lens from the camera body.
Details on how to cock the shutter and mirror simultaneously.
Explains how to disengage the release lock and press the button.
Steps to remove the rear body cap from the camera back.
Procedure for mounting the roll film holder onto the camera.
Instructions on how to safely remove the roll film holder.
Step-by-step guide for loading 120 or 220 film into the holder.
Instructions on aligning the leader paper's starting mark for film advance.
Steps for correctly inserting the film cassette into the holder.
How to wind the film to the first exposure position.
Explains the process of advancing film after exposure.
Procedure for removing and storing exposed film from the holder.
Discusses the recommended sequence for advancing film and cocking the shutter.
How to set the desired shutter speed using the lens ring.
How to set the desired aperture value on the lens.
How to adjust focus using the focusing knobs on the ground glass.
How to secure the focusing knob using its fixing lever.
Explains how to read the distance scale for focusing and subject distance.
To Next Page
