Mamiya Professional C220 User Manual

PHEL
AUTIONS
Observe the previously mentioned steps
before loading a roll of film. Especially
Adjust the automatic film
stopper for the film to be
used (120 or 220 roll film).
ry
Slide the counter change-over
button (3) to show the same figure
in the window immediately below
the button as that of the film
(120 or 220). When 120 shows
in the window, the automatic film
stopper functions until 12 ex-
posures have been made. When
220 shows in the window, the
stopper functions until 24 ex-
posures have been made.
= Loading and
4
i » Open the back cover and in-
sert a take-up spool in the take-up
spool chamber (29).
the film wind knob (4), by turning the
indicator for spool-attaching position
While turning
(28) in the take-up spool chamber
toward the operator, attaching the
spool becomes very easy. Pull out
the spool change knob (30), put the
spool into the axis, and reinsert the
spool change knob.
Q
note that if the pressure plate is not cor-
rectly positioned for the size of film used,
do not expect sharp, well-focused negatives.
-64
Adjust the position of the
pressure plate according ta (2)
the tibn used
Open the back cover, twist the
pressure plate (34) either to the
right or left 90 degrees until the
red mark on the pressure plate
matches either 120 or 220. The
figure 120 or 220 will appear in
the film indicator window (26), in-
forming the user of the loaded
film size when the back cover is
closed.
Unloading Film
Pull out the spool change
knob (33), and insert a roll of film
in the film chamber (32).
(3)
Set the counter change-over button before
loading a roll film, and never change it while
the film is loaded. Should you carelessly
change this button while film is loaded, this
is what would happen:
(1)
When the exposure counter number
does not exceed 10, and you have not
yet released the shutter for the tenth
exposure...
(a) When 120 is changed to 220, the
counter number clicks to 24.
(b) When 220 is changed to 120, the
counter number stops at 12, and
the automatic film stopper no long-
er functions, freeing the film with-
out stopping.
When the number is 11 or more, the
counter change-over function will not
be changed. In this case, the automatic
film stopper functions according to the
film setting originally made.
After making 13 or more exposures,
should you inadvertently change the
counter change-over button which was
originally set at 220 to 120, the ex-
posure counter will not return to “O”
when the back cover is opened. In this
case, twist the counter change-over
button back to 220, the exposure count-
er will return to “O”
PRECAUTIONS
By turning the spool change knobs
(30) and (33) either to the right or
left after pulling them outward, the
knobs stay at their protruded posi-
tions. Turn the knobs backward to
reinsert them.
If both spool change knobs are not
returned to their original positions
after loading a film, unbalanced film
winding will result. When either spool
change knob protrudes freely from
the camera body, push it from the
outside to its original inserted posi-
tion.
BAS)

Mamiya Professional C220 Specifications

General

Brand	Mamiya
Model	Professional C220
Category	Digital Camera
Language	English