Mamiya ZD - Page 9

The upper level will display the p r ~adjustmen t and post-adjustment
images
in the {Processing Wizard).
The
lower l ev .el will display the image variat ion according to the adjusted rates.
The
adjustment rate can be set by selecting on the desired image in the lower level
Clicking on the leh and right images on the lower level will display the image in the
center . and will be referred to as a post-adjusted image.
Ad justable Range sl ider
Exposure correction can be se t
us i ng the adjustment width setting
us ing the adjustment width slider on t he
[Exposure Compensation] screen. Clicking on
the ri ght hand image will adjust in the+
direct ion and cl icking on the left hand image
will adjust in the - directio .n.
3. Cl ick (Next] after setti ng the [Exposure Compensation] settings a111d set the
[Tone).
On the [Tone] screen, click i ng on
t he right hand image will adj ust in
the [Medium High] direction and clicking on the
left hand image will adjust in t he [Medium Low]
direction.
Placing a check mark on [File] will use .a
previously saved adjustment file for
adj us tment.