proper, the minimum aperture of the lens in use will flash to indicate overexposure; the maximum aperture will
flash for underexposure. When proper exposure is desired, turn the shutter speed dial until the flashing ceases.
Selecting the AE Mode
Aperture Priority Crossover AE - With this exposure mode, you set the shutter speed and the camera selects the
correct aperture for you.
1. Set the crossover switch (A) at its normal position (flush with camera body).
2. Set the shutter speed dial at "A" (dial locks at "A" to prevent accidental movement).
3. Set the aperture on the lens aperture ring in accordance with the effects desired or lighting conditions of the
subject.
NOTE: If the aperture ring is locked at the white button (C), press the button and simultaneously rotate the ring
to your desired aperture setting.
4. Press the shutter button partway, then your preselected aperture and the shutter speed selected by the camera
for the proper exposure will appear in the viewfinder.
To Next Page
Loading...
Need help?
General
