Loading the Batteries
1. Press the battery chamber cover in the direction of the arrow until it swings open.
2. Before inserting the batteries, wipe both sides with a dry cloth to ensure that contacts are clean. Place both
batteries into the battery chamber as shown, making sure the (+) (-) polarity markings match those on the
chamber cover.
Your ZE-X will not function if batteries are improperly inserted or batteries are not loaded.
Battery Check/Low Battery Warning
After loading the batteries, press the shutter button partway to see if the data display inside the viewfinder
lights. If the display fails to light, batteries may be depleted or improperly inserted.
Low Battery Warning:
When the entire I display begins to flicker at a fast rate (8 flashes per second) batteries are low and should be
replaced promptly to ensure uninterrupted operation. The slow pulsation of the displays warns you of over and
underexposures.4www.butkus.org
To Next Page
Loading...
Need help?
General
