B (Bulb) for Long Exposures
· The use of an optional cable release adapter, lockable cable release and sturdy tripod are recommended to
prevent camera shake.
· Also, since long exposures present a real drain on the batteries, we recommend to use fairly new batteries.
· The self-timer doesn't operate for "B" setting.
· If the aperture ring is set at the white button (auto) with the shutter dial set at "B" the shutter does not release;
the "M" indication flashes in the viewfinder to warn you to reset the aperture.
When you wish to take family or group photos or snapshots of places you have been and include yourself in the
picture, you can mount the camera on a tripod and use the self-timer. It is also useful for close-up and copy
works.
Self-Timer
The self-timer has 2, 6 and 10 second settings. During self-timer operation the timer LED flashes and the
camera sounds an audible warning; at the end of 2 seconds, the speed of the warning indicators increases to let
you know the shutter is about to release.
1. Set the selector lever (E) to the desired interval setting (this may be performed either before or after film
advance).
2. Focus and close the eyepiece blind to keep out stray light.
To Next Page
Loading...
Need help?
General
