BETRIEBSSTOFFE / SPEZIFIKATIONEN
Anwendungs– und Temperaturbereich Sachbezeichnung / Spezifikation alternative Spezifikation
Betriebsstoff der Erstbefüllung fett gedruckt.
E/BEM - 43
..........................
Voith Diwa–Getriebe 851 bis
864.3, 502–3
und
Midimat BR (nur Getriebe,
Retarder siehe Seite xx)
ATF MAN 339 Typ D................................
wahlweise
ATF MAN 339 Typ F.................................
(factory fill synthetic)
Voith Schmierstofflisten G–607 und
G–1363 beachten!
................................
bis –45°C................................ ATF MAN 339 Typ F nur
Castrol Transmax Z bzw.
Veedol Unitrans Z .....................................
ZF–Transmatic–Getriebe ......
mit WSK (Wandler-
schaltkupplung)
Motorenöl MAN 270 SAE 30.....................
ZF–Schmierstoffliste TE–ML 02 beachten!
Motorenöl wie Dieselmotor
ZF WSK..................................
(mit eigenem Ölhaushalt)
bis –40°C nur ATF einsetzen
ATF MAN 339 Typ D.................................
wahlweise
ATF MAN 339 Typ F.................................
oder
Motorenöl MAN 270 SAE 30
wahlweise SAE 20W-20............................
ZF–Schmierstoffliste TE–ML 10 beachten!
Motorenöl wie Dieselmotor
ZF–ECOMAT, Typ 4, 5 oder 6
HP 500/502/590/592/600/602
sowie
ZF–Wandlerschaltgetriebe
HP, HM
ATF MAN 339 Typ D................................
wahlweise
ATF MAN 339 Typ F.................................
(factory fill synthetic)
ZF–Schmierstoffliste TE–ML 14 beachten!
................................
bis –45°C................................
ATF MAN 339 Typ F nur
Castrol Transmax Z, Veedol Unitrans Z
bzw. ZF Ecofluid A....................................