Need help?Do you have a question about the Man D 2840 LE 401 and is the answer not in the manual?
Explains the meaning of safety symbols like Danger, Caution, and Note.
Essential safety rules for engine commissioning, starting, and general operation.
Specific safety precautions to follow during engine maintenance and care activities.
Regulations and advice to prevent damage and premature wear of the engine.
Guidelines for preventing environmental pollution and safe handling of used engine oil and other fluids.
Procedures and recommendations for the first commissioning of a new or overhauled engine.
Daily checks before starting and the procedure for verifying the engine oil level.
A step-by-step guide on how to safely start the engine.
Introduction to the Mini Marex electronic drive lever control system and its general operation.
Details of the command master panel and the procedure for the "Warming Up" engine function.
Steps required to enable the control system and its consequences on control stands.
Procedures for transferring command control from one stand to another.
Explains methods for command change, including lever comparison and free changeover.
The correct steps for safely shutting down the engine after operation.
Detailed instructions for engine oil changes and lubrication system checks.
Information on the fuel system, fuel quality requirements, and cleaning the fuel pre-cleaner.
Safety precautions and step-by-step instructions for draining the engine's cooling system.
To Next Page
General
