SERVICE PRODUCTS / SPECIFICATIONS
Application and temperature range Item name / specification Alternative specification
WE/BEM - 40 Initial fill service product in bold type.
GAS ENGINE (CNG/LPG)
Lubrication.....................
Service fill, .............................
application, see page 28.
Gas engine oil M 3271–1 ..........................
none
Cooling ...........................
Cooling system ......................
Antifreeze and anti-corrosion
protection, see page 35
Antifreeze MAN 324 ..................................
or
anti-corrosion agent MAN 248 ..................
+ potable tap water
none
none
Fuel .................................
See page 32 - 33 ................... Compressed natural gas (CNG)................
or liquefied petroleum gas (LPG) ..............
none
none
GEARBOX
Manual gearbox .............
ZF synchromesh gearbox (S),
constant-mesh gearbox (K)
with synchronised splitter
and/or range-change
ZF–NMV . . ./1
(see next page for exceptions)
as well as
Eaton synchromesh gearbox,
Eaton Samt B and Eaton
AutoShift 16 gearbox
High pressure gear oil MAN 341 type N**,
ML*, TL*, SL*, SL+
1)
SAE 80W, 80W-90 or 75W-90 ..................
or
Multifunction gear oil M 3343 type ML*,
SL*
SAE 80W-90, 75W-90...............................
See ZF List of Lubricants TE-ML 02!
MIL–L–2105 (API–GL 4)
MIL–L–2105 D (API–GL 4 + 5)
ZF gearbox: engine oil MAN 270
SAE 30 **
ZF synchromesh gearbox
with secondary retarder or
ZF–Intarder
High pressure gear oil MAN 341
type TL*, SL*, SL+
1)
..................................
SAE 75W–80W or 75W-85W *
Optionally:
Engine oil MAN 270 SAE 30 **..................
See ZF List of Lubricants TE-ML 02!
MIL–L–2105 (API–GL 4)
Same engine oil as diesel engine
(no multigrade oil)
* Specified for maintenance group "A+" ** Not approved for maintenance group "A+"
1)
Specified for TG–A gearbox with oil change interval 500,000 km
To Next Page
Loading...
Need help?
General
