Technical data
57
Fuel system
Injection In-line pump, V-saddle-mounted
Governor Centrifugal governor (variable-range
speed governor) with smoke stop
Start of delivery
D 2848 LE 401 22° ± 1° before TDC
D 2848 LE 403
up to engine No. ... 9211 019 ....
from engine No. ... 9211 020 ....
24° ± 1° before TDC
18° ± 1° before TDC
D 2848 LE 405
up to engine No. ... 9261 016 ....
from engine No. ... 9261 017 ....
21° ± 1° before TDC
15° ± 1° before TDC
Injectors five-hole nozzles
Opening pressure of injector
New nozzle holder: 295 + 8 bar
Used nozzle holder: 280 + 8 bar
Engine lubrication Force feed
Oil capacity in oil sump (litres) min. max.
deep 12 l 18 l
shallow 20 l24 l
Oil change quantity (with filter)
deep 21 l
shallow 27 l
Oil pressure during operation (depend-
ing on oil temperature, oil viscosity
class and engine rpm)
must be monitored by oil pressure moni-
tors / gauges
Oil filter Full flow filter with two paper cartridges
Engine cooling system Liquid cooling
Coolant temperature 80−85°C, temporarily 90°C allowed
Coolant filling quantity 63 l
Electrical equipment
Starter 24 V; 5,4, 6.5 kW
Alternator 28 V; 55, 110, 120, 225 A
To Next Page
Loading...