Need help?Do you have a question about the Man D 2842 LE 414 and is the answer not in the manual?
General| Engine Model | D 2842 LE 414 |
|---|---|
| Displacement | 21.93 liters |
| Fuel System | Direct injection |
| Aspiration | Turbocharged |
| Number of Cylinders | 12 |
| Power Output | 1100 hp |
| Emission Standard | EU Stage IIIA |
| Cooling System | Liquid-cooled |
Essential safety rules for personnel, operation, and maintenance.
Specific regulations to avoid personal injury during operation and maintenance.
Safety precautions to be observed during engine maintenance and care activities.
Guidelines to prevent premature wear and damage to the engine.
Steps for initial start-up of a new or overhauled engine.
Routine checks performed daily before starting the engine.
Detailed steps for safely starting the engine, including pre-glow and oil pressure checks.
Overview of monitoring systems and round instruments for engine operation.
Description and functions of the MMDS-L display for engine monitoring.
How to operate the MMDS-L device, including key functions, tests, and system failures.
Details on the MMDS-LC display device for engine data and alarms.
Understanding the codes and messages displayed for engine alarms.
Description of the MMDS-EP engine room monitoring panel.
Operation and functions of the Mini Marex electronic drive lever control system.
Procedures for requesting and taking over control of the engine system.
Methods for changing control between different command stations.
Introduction to the Em-C emergency operation system.
Step-by-step guide for changing engine oil and filter elements.
Diagnosing and resolving issues with engine starting, stalling, or speed problems.
Troubleshooting engine performance, smoke, noise, and temperature issues.
To Next Page
