Commissioning and operation
30
The function is called up using the PRG key
Prg
.
A new page is opened and the current time (time / date) is displayed.
The selection cursor jumps to “Hour”.
set-time hour minute second
time (H:M:S) >13< : 29 : 56
day month year
date (D:M:Y) 27 : 06 : 00
If nothing is to be changed, you can cancel using the Menu key
ALARMS
Men
. Otherwise, the
setting is made using the +– keys
TEST
RESET
and the PRG key
Prg
in the order
Hour, Minute, Second, Day, Month and Year. A correctly specified time or date is con-
firmed using the PRG key
Prg
and the selection cursor jumps to the next value. The
year is given last, and the selection cursor jumps to the second last line to the item “exit”;
the time setting is now concluded.
>exit< Back get-mmds-time
You return to the main menu by pressing the PRG key
Prg
or the Menu key
ALARMS
Men
. In
the event of an input error, you can use the function “back” to repeat the input.
An additional function makes it possible to download the system time of the MMDS cen-
tral unit into
the display module. To do so, the selection cursor is placed on “get-mmds-time” and
confirmed with
PRG
Prg
. If the central unit is active (engine ignition on), the date and time are over-
written and the
following message appears briefly in the display.
>>> LOAD MMDS-SYSTEM-TIME <<<
If the central unit is switched off (engine ignition off), nothing is changed and the following
message appears:
>>> NO MMDS-TIME RECEIVED <<<
The selection cursor then jumps back to the second last line to the item “exit”:
To Next Page
Loading...
Need help?
General
