Man D 2842 LF - Page 526

SERVICE PRODUCTS / SPECIFICATIONS
Application and temperature range Item name / specification Alternative specification
Initial fill service product in bold type.
W
E/BEM - 55
ANTI-CORROSION PROTECTION
Destination and other displays (interior), painted
outside surfaces................................................................
Paint-protecting wax M 3082–A................
none
Skeleton / side wall
struts (buses)
................
Initial and subsequent
treatment ................................ Cavity wax M 3082–B2 .............................
none
Cab cavities (trucks)
.....
Initial treatment.......................
Subsequent treatment............
Cavity wax M 3082–B1 .............................
Cavity wax M 3082–B3 .............................
none
none
Wheel arches, underfloor, cab underside, engine
compartment flap and front flap......................................
Underfloor wax M 3082–C ........................
Optionally:
Two-coat wax M 3082–Z...........................
none
none
BATTERY
Charging
........................
Density 1.285 kg/l (32°Bé)......
Top up ....................................
Battery acid ...............................................
Distilled water only ....................................
none
none
Polarity protection
........
............................................... Techn. Vaseline S–743.............................
TL 9150–0042
none
MISCELLANEOUS
Central lubrication
system
............................
(lubricating grease)
Vogel......................................
Down to –25 °C
Multipurpose grease MAN 283 LI–P 00/000
Multipurpose grease (lithium-12-
hydroxistearate type)
+ EP additive package, without
solid lubricants (graphite, MoS
2
)
NLGI class 00/000
In extremely cold
application conditions
(Vogel)
.............................
Down to –45 °C ...................... Castrol Syntrans gear oil
SAE 75W–85W.........................................
none