General Safety Instructions
19
Carefully read these Operating Instructions before starting any work!
This is especially valid for the chapter on General Safety Instructions
and the safety instructions in each of the chapters.
Hot Surfaces
CAUTION
Risk of burns due to hot surfaces
Touching hot components causes burns.
For this reason:
S When performing any work in the vicinity of hot components always wear protective clothing and
protective gloves.
S Before starting any work ensure that all components have cooled down to ambient temperature.
Noise
WARNING
Hearing damage due to noise
The noise level in the working area can cause serious hearing damage.
For this reason:
S Always wear hearing protection when working.
S Do not unnecessarily remain in the hazard area. Leave hazard area when work is finished.
Sharp Edges and Corners
CAUTION
Risk of injury on edges and corners
Sharp edges and corners can cause skin grazes and cuts.
For this reason:
S Always work carefully and with caution in the vicinity of sharp edges and corners.
S In cases of doubt, wear protective gloves.
Dirt and Objects
CAUTION
Risk of tripping due to dirt and discarded objects
Dirt and discarded objects represent a tripping and slipping hazard and can cause serious injuries.
For this reason:
S Always keep the work area clean.
S Remove any objects that are no longer necessary.
S Mark areas where there is a danger of tripping with yellow and black striped tape.
To Next Page
Loading...
Need help?
General
