Installation and Commissioning
50
Carefully read these Operating Instructions before starting any work!
This is especially valid for the chapter on General Safety Instructions
and the safety instructions in each of the chapters.
6.7.2 Connecting the exhaust system to the engine
Flexible connecting elements which allow engine
movements due to the flexible engine mounting
and decouple the engine from the exhaust system
in terms of vibration must be installed between the
engine and the exhaust system.
Example: compensator
1
NOTE
Component damage due to forces acting on the turbocharger.
For this reason:
S Exhaust gas lines must be fastened and supported so that no forces act on the turbocharger.
To Next Page
Loading...
