Technical Data
93
Carefully read these Operating Instructions before starting any work!
This is especially valid for the chapter on General Safety Instructions
and the safety instructions in each of the chapters.
Ignition timing - crank angle
before TDC
Natural gas operation Biogas operation
E3268 LE 212
1500 rpm - German Technical
Instructions on Air Quality Con
trol
18$1
E3268 LE 222
1800 rpm - German Technical
Instructions on Air Quality Con
trol
20 1
Engine lubrication Force feed lubrication
Lubrication oil pressure during ope
ration (depends on engine speed,
oil temperature and engine load)
must be monitored via an oil pressure monitor or a display device
Oil filter 2 oil filters Full-flow filters each with 1paper filter cartridge
Oil capacity in oil sump (litres)
max.
95 l
Engine cooling system Liquid cooling
Coolant temperature 80 / 88C engine inlet/outlet
Coolant filling capacity in engine approx. 34 l
Electrical equipment
Starter 24 V; 7 kW
To Next Page
Loading...
Need help?
General
