Technical Data
95
Carefully read these Operating Instructions before starting any work!
This is especially valid for the chapter on General Safety Instructions
and the safety instructions in each of the chapters.
Ignition timing - crank angle
before TDC
Natural gas operation Biogas operation
E3262 LE 202
1500 rpm - German Technical
Instructions on Air Quality Con
trol
16 1 201
1800 rpm - German Technical
Instructions on Air Quality Con
trol
20 1 201
E3262 LE 212
1500 rpm - German Technical
Instructions on Air Quality Con
trol
161 201
1800 rpm - German Technical
Instructions on Air Quality Con
trol
201 201
Engine lubrication Force feed lubrication
Lubrication oil pressure during ope
ration (depends on engine speed,
oil temperature and engine load)
must be monitored via an oil pressure monitor or a display device
Oil filter 2 oil filters Full-flow filters each with one filter cartridge
Oil capacity in oil sump (litres)
max.
105 l
Engine cooling system Liquid cooling
Coolant temperature 80 / 88C engine inlet/outlet
Coolant filling capacity in engine approx. 50 l
Electrical equipment
Starter 24 V; 7 kW
To Next Page
Loading...
Need help?
General
