mandine MSB3002B-17 - Technical Specification

Using the blender (with plasc blending cup)
Technical specicaon
• Rated voltage : 220-240V~ 50-60Hz
• Rated power : 300W
step 1
food
push up
surface
step 2 step 3
• Fill the food into the Plasc Blending Cup (step 1).
• Screw the Blending Cup Base on the Blending Cup clockwise (step 2).
• Place the Blending Cup Base Assembly onto the Motor Base
and rotate clockwise by holding the surface of the Blending Cup
Base (step 3) to lock unl you hear a slight click. The markings
on the Motor Base and the Blending Cup Base should now be
aligned with each other. If this is the case, the Blending Cup Base
Assembly is locked correctly. Now the blender is ready for use.
• Plug in. Press the Power Buon inwards and remains on as long as
the Power Buon keeps being pressed.
• Aer you have completed blending, Release the Power Buon to
stop running.
• Aer use, unplug and dismantle
• Rotate anclockwise to unlock and remove the Blending Cup Base
Assembly from the Motor Base.
• Place the Blending Cup assembly downwards. Unscrew the
Blending Cup Base anclockwise from the Blending cup and pour
out the food.
• Warning: The connuous operang me must be less than
1 minute. Never blend hot oil, fat or meat. Do not operang
without liquid.
• If your blender gets blocked, rst stop and unplug before clearing.
• For the convenience of drinking clean and fresh mixture, screw the
Blending Cup Cap on the Blending Cup clockwise. The hand hook
on the Blending Cup Cap is designed for being easily portable.
Push up the snap fastener to open the outlet when drinking or
pouring out the inside mixture at any me. The Blending Cup Cap
can also be placed onto the boom of the Cup when blending.
• Always switch o and unplug before cleaning. Please refer to the
instrucon in the “care and cleaning”.
GB-6 GB-7