camel
5
freedom through lightweight solutions
ME0074 issue 2
WARNING: In order to maintain stability, sections
must always be fully inated from the bottom up, in
sequence.
Note: only the backrest (section 1) may be partially
inated before the lower sections.
8
9
10
Continue to press buttons 3 and 4 • in sequence
until the sections become rigid, in exactly the
same manner - g.
8
Press button 1 to fully raise the backrest and arrive •
at a sitting position - g.
9
Whether assisted or used alone, the patient should •
now be in a position to stand or transfer - g.
10
To Next Page
