FAQ
No HDMI input on your TV?
The Manhattan T1 and T2-R are designed for HD, which requires HDMI. However, if you have
an older TV that doesn’t have HDMI, these models can almost certainly be connected to your
TV using the Analogue AV Kit (not included). Your TV simply needs either of these inputs:
Manhattan Analogue AV Kit
Only £4.99 (inc VAT) + delivery. To order, call 020 8450 0005.
Included are a cable and adapter that will connect your Manhattan box to either of the inputs
above.
⚠ Using a third party cable
You can purchase the 3.5mm 4-pole Minijack to RCA AV cable from third parties. However, as
there is no standard for the 4-pole Minijack, please be aware of the following:
The yellow, white and red cables may be mixed up when used with your Manhattan box.
Normally the yellow cable carries the video signal, the red cable carries the right audio
To Next Page
Need help?
General
