1-27
XXXX Kg
XXXX Lbs
xxxxxx
5 - WHEEL LOAD
This shows the maximum load that a wheel may exert on the ground (see 2 - DESCRIPTION:
CHARACTERISTICS for the break-through value).
6 - FREE-WHEELING PROCEDURE
This describes the procedure for setting the machine in freewheeling mode when an
accident or a breakdown causes the electrical control boxes to be rendered unusable.
(see the description in CHAPTER 2).
7 - EMERGENCY DESCENT
This describes the procedure for an emergency descent of the scissors using the manual
control when an accident or breakdown has occurred.
(see the description in CHAPTER 2).
647369 (01/03/2017)
78/100 SEC 2 / 120 SE 2