Manitou 120 SC-2 User Manual

2-35
TYING DOWN THE MACHINE FOR TRANSPORT BY TRUCK OR TRAILER
- Always chock the machine’s wheels in preparation for transport.
- Retract and tie down the platform’s extension.
- Use the tie-down points on the chassis to fasten the machine to the transport bed (Figs. E & F).
- Use at least two chains or belts.
- Use chains or belts with a sufficiently high load capacity.
- Fix the chocks to the bed in front of and behind each of the platform’s tyres 1 (Figs. E & F).
- Also fix chocks to the bed on the inside and outside of each tyre 1 (Fig F).
- Set the ignition switch in the OFF position and remove the key before transporting the machine.
- Inspect the whole machine, looking for anything that may be loose or poorly fastened.
- If the ramps have been folded up, tie them down with belts before transporting the machine.
UNLOADING
Never come down from a truck moving forwards (counterweight to the front
over the steered wheels); the poor grip from the rear wheels reduces the braking
efficiency.
Ensure that you adapt the platform’s translation speed by controlling the speed
with the translation joystick.
F
E
647367 (01/03/2017) 100/120 SC-2 / 140 SC

Manitou 120 SC-2 Specifications

General

Brand	Manitou
Model	120 SC-2
Category	Lifting Systems
Language	English