Manitou A Series Operator's Manual

3 - 37
G5 - LIFT TRUCK ON A PLATFORM
TRANSPORT
LOAD THE LIFT TRUCK
- Block the wheels of the platform.
- Fix the loading ramps so that you obtain an angle as little as possible to lift
the lift truck.
- Load the lift truck parallel to the platform.
- Stop the lift truck (See DRIVING INSTRUCTIONS in SECTION 1 -
OPERATING AND SAFETY INSTRUCTIONS).
STOW THE LIFT TRUCK
- Fix the chocks to the platform at the front and at the
back of each tire (Fig. G5/1).
- Fix also the chocks to the platform in the inside of each
tire (Fig. G5/2).
- Stow the lift truck on the platform with enough resisting
ropes. At the front of the lift truck, on the fastening
points 1 (Fig. G5/3) and at the back, on the towing pin
2 (Fig. G5/4).
- Tighten the ropes (Fig. G5/5).
G5/2
G5/1
G5/3
1
1
G5/5
G5/4
MLT 629/633/730 . .........
2
Ensure that the safety instructions concerning the platform are followed
before loading the lift truck, and that the truck driver has been informed
about the dimensions and the weight of the lift truck (See
CHARACTERISTICS in SECTION 2 - DESCRIPTION).
Ensure that the platform has dimensions and a load capacity sufficient for
transporting the lift truck. Check also the pressure on the contact surface
allowable for the platform in connection with the lift truck.
CAUTION
For lift trucks equipped with a turbo-charged I.C.
engine, block off the exhaust outlet to avoid rotation of
the turbo shaft without lubrication when transporting
the vehicle.
IMPORTANT
2
G5/4
MT 732/932 . .....
FORKLIFT SAFETY
CONTENTS

Manitou A Series Specifications

General

Brand	Manitou
Model	A Series
Category	Front End Loaders
Language	English