2 - 64
A
B
1
36 - STEERING WHEEL REGULATING HANDLE
MLT 629/730 Série A
MLT 629/730 Turbo Série A
MLT 629/633/730 -120 LS Série A
MLT 633/730 LS Turbo Série A
MLT 633/730 -120 LS POWERSHIFT Série A
MLT 730 Turbo POWERSHIFT Série A
This handle enables the angle and height of the steering wheel to be adjusted.
- Turn handle 1 towards A to loosen and adjust steering wheel.
- Turn handle 1 towards B to lock steering wheel in the position required.
37 - USE OF TRANSMISSION CUT-OFF
NOTE : In all cases transmission cut-off can be effected using the gear lever
(Except for
POWERSHIFT)
.
TRANSMISSION CUT-OFF TO BRAKE PEDAL (POSITION A)
• When loading.
TRANSMISION CUT-OFF TO HYDRAULIC CONTROLS LEVER (POSITION B)
• When driving.
• For inching and continuous stopping and starting (Delicate handling). In order
to optimise hydraulic movements, cut off transmission to the hydraulic
controls lever.
• Starting up on a slope.
B
A
To Next Page
Loading...
