2-86
15 - MACH2 QUICK-RELEASE COUPLERS ON ACCESSORY CIRCUIT
Enables the use of a hydraulic attachment fitted with MACH2 quick-release couplers.
CONNECTING A HYDRAULIC ATTACHMENT
- Lower lever 1 and valve 2 and connect the MACH2 quick-release couplers on the
attachment.
- Lift up lever 1 to lock the connection.
NOTE: A foolproofing device prevents the connection inversion.
DISCONNECTING A HYDRAULIC ATTACHMENT
- Lower lever 1 and disconnect the MACH2 quick-release couplers from the attachment.
- Lift up lever 1.
16 - MACH2 QUICK-RELEASE COUPLER MACH2 ON ATTACHMENT CIRCUIT +
HYDRAULIC ATTACHMENT LOCKING
Enables the locking of the attachment on the carriage to be controlled and a hydraulic
attachment with MACH2 quick-release couplers to be used (see: 2 - DESCRIPTION:
14 - HYDRAULIC ATTACHMENT LOCKING and 15 - MACH2 QUICK-RELEASE COUPLERS
ON ATTACHMENT CIRCUIT).
17 - EXTERIOR DRAIN BACK
Enables connection of a hydraulic attachment for which drain-back is required.
1
2
To Next Page
Loading...
