2-87
18 - LIFTING RING ON SINGLE CARRIAGE
CONDITIONS OF USE
Follow the instructions given in the instruction manual (see: 1 - OPERATING
AND SAFETY INSTRUCTIONS: INSTRUCTIONS FOR HANDLING LOADS).
- The lifting ring must be used WITHOUT FORKS AND ATTACHMENTS,
but the angle of inclination of the carriage must be same as
when the forks are used in the horizontal position.
- Check the maximum permitted angle, which is 45°.
- Do not change the angle of the carriage while using the
lifting ring.
- The lifting hook, the chains and slings shall have a minimum
capacity of 3000 kg with a factor of safety against breakage of 4.
LOAD CHARTS AND FUNCTION SHEETS
MLT 731 ...
The load charts are given for use without forks and
without attachments.
LOAD CHARTS AND FUNCTION SHEETS
MLT 735 ...
The load charts are given for use without forks and
without attachments.
N°265284
Kg
Kg Kg
Kg
Kg Kg Kg
Kg Kg Kg
Kg Kg
Kg
N° 276730
MLT731 + TS A S 3T
45° 50° 62,5°40°
30°
3000KG
MAXI
20°
10°
0°
-4°
5
5
5,20
6
7
4
4
3
3,50
3
2
2,35
2
1
1,65 0,75
1
0m
0m
0kg
3000kg
2000kg
2500kg
1500kg
1200kg
N° 276765
MLT731 + TS A S 3T
45°
Maxi
36km/h Maxi
(10m/s)
1,44km/h (0,4m/s)
Maxi
0,3m Maxi
3m Mini
1,4m Maxi
3000KG
MAXI
MLT7.. + TS AS 3T
To Next Page
Loading...
