Instrument Panel
The instrument panel installed on your Manitou displays information
about your engine and related systems. The instrument panel is located
on the helm of your boat. The normal readings of the gauges provide a
reference point to judge your boat’s operations. Although some gauges
fluctuate, you should investigate the cause of any sudden or irregular
changes in gauge readings. Some of your boat’s switches are also found
in the helm area.
Smart Screen
Your Manitou may have a smart screen on the instrument panel. This
screen displays information and provides controls for a variety of
different functions on your boat. It integrates instrumentation and
controls from electronically-controlled engines communicating via SAE
J1939 and NMEA 2000 protocols. The display is a multi-functional tool
that lets you view different display settings, engine parameters and
service codes.
To clean your smart screen, use a soft cloth. If necessary, you can also
use window cleaner or alcohol to clean the glass portion of the display.
Never use harsh or abrasive cleaners on the unit.
For information on using the smart screen device, review the Smart
Screen manual included in your owner’s packet.
Guide to Your Boat’s Instrument Panel
The information that follows provides a reference for your boat’s gauges,
including normal gauge readings where applicable. Your boat’s switches
are also shown. Switches and gauges present in the helm area vary by
Manitou model. Use the table below to locate your model, then turn to
that page.
To Next Page
Loading...
Need help?
General
