Manitowoc B320 Series - User Manual

Lists air-cooled and water-cooled model numbers for the ice machine covered by this guide.

Details optional accessories like Bin Casters, Decorator Front Covers, Stacking Kits, Ice Baggers, Water Filters, Cleaners, Dispensers, and AuCS™.

Explains where to find the model and serial numbers for the ice machine and bin/dispenser.

Details the parts and labor warranty coverage for the ice machine, including duration.

Lists items and conditions not covered by the ice machine warranty.

Explains requirements for performing authorized warranty repair on the machine.

Identifies and illustrates the key components of the ice machine with diagrams.

Describes the initial startup and restart procedures after an automatic shut-off.

Explains the process of water freezing into ice cubes on the evaporator.

Details the process of releasing frozen ice cubes from the evaporator into the bin.

Explains how the machine automatically shuts off when the storage bin is full.

Instructions for checking and adjusting the water level in the ice machine.

Guide for checking and adjusting the ice thickness probe for proper cube formation.

Provides a chart outlining semi-annual maintenance tasks and their page references.

Describes checks for leaks, tubing, and airflow for general inspection of the ice machine.

Instructions for cleaning the exterior surfaces of the ice machine with care.

Procedures for cleaning the air-cooled condenser and its washable filter.

Notes that water-cooled condenser cleaning requires specialized service and solutions.

Details the steps for cleaning the ice machine using the SeCS™ system.

Instructions for using the SeCS™ system for sanitizing the ice machine.

Explains how the AuCS™ accessory automatically initiates cleaning cycles based on harvest count.

Describes the sequence of events for manual start and automatic cleaning modes.

Details the duration and steps of the cleaning or sanitizing cycle.

Outlines the duration and steps of the rinse cycles following cleaning.

Explains how to change the switch position during the automatic cleaning process.

Instructions on mixing and using cleaning and sanitizing solutions for parts.

Step-by-step guide to remove and disassemble the water dump valve for cleaning.

Instructions for disconnecting and removing the water pump from the machine.

Guide on removing the ice thickness probe for cleaning or replacement.

Steps to remove the water trough from the ice machine for cleaning.

Instructions for removing the float valve assembly for cleaning.

Steps for removing and disassembling the water distribution tube for cleaning.

Instructions on how to remove the water curtain from the machine.

Step-by-step guide for replacing the water filter cartridge in the system.

Procedures for properly winterizing self-contained air-cooled ice machines.

Procedures for properly winterizing water-cooled ice machines.

Procedures for properly winterizing remote ice machine setups.

Refers to a separate guide for winterizing the AuCS™ accessory.

A checklist of common problems, possible causes, and solutions for ice machines.

Instructions on how to restart the machine after a safety limit feature has stopped it.

Fields for recording distributor, model/serial number, and installation date for warranty.