34 Part Number 000015432 4/18
Step 6 Refer to chart and premix the correct solution
of cleaner and cool water for your model ice machine.
Model Amount of Cleaner
Part Number
000000084
Amount of
Water
CNF201 CNF202 2 oz (60 ml) 32 oz (1 liter)
Step 7 Remove the top cover from the ice chute and
pour the cleaner/water solution into the evaporator. Add
the entire amount of premixed solution (excess solution
will exit through the overflow tube in the water reservoir).
Step 8 Replace the ice chute cover and allow the ice
machine to stand for 30 minutes.
Step 9 Turn on the water supply to the ice machine.
Step 10 Move the toggle switch to the ICE position. The
compressor will energize and produce ice with the cleaning
solution.
Step 11 The ice machine will freeze and discharge the
cleaning solution into the bin. Allow the cycle to run for 15
minutes.
NOTE: Discard all ice produced during the cleaning process.
Cleaning and sanitizing must be performed on adjacent
surface areas not contacted by the water distribution
system. Refer to “Removal of Parts for Cleaning or
Sanitizing” on page 38 - Disassemble, clean and sanitize
the ice machine a minimum of once every six months.
To Next Page
Loading...
Need help?
General