Manitowoc CVDT1200 User Manual (English)

Other manuals for Manitowoc CVDT1200

Installation, Operation And Maintenance Manual57 pages

Questions and Answers:

A
annapetersenAug 13, 2025
Why is my Manitowoc CVDT1200 Ice Maker not working?
- C
  Cory HopkinsAug 13, 2025
  If your Manitowoc Ice Maker isn't operating, several factors could be at play. First, ensure the unit is receiving electrical power by checking the fuse, resetting the breaker, or turning on the main switch. A tripped high-pressure cutout might also be the culprit, requiring you to clean the condenser coil. Confirm that Energy Saver settings or other custom programming aren't inadvertently halting the ice machine. Make sure the water curtain is correctly installed and swings freely. Verify the ice machine is powered on, with the display indicating “Making Ice”. For IB Models, check that the dispenser ice level thermostat is correctly adjusted.
T
Tiffany BarkerAug 17, 2025
Why is my Manitowoc CVDT1200 Ice Maker not making ice?
- M
  Michele ButlerAug 17, 2025
  Your Manitowoc Ice Maker might not be operating due to several reasons: * There's no electrical power: Replace the fuse, reset the breaker, or turn on the main switch. * The high-pressure cutout is tripping: Clean the condenser coil. * Energy Saver mode is stopping the ice machine: Reset to factory defaults. * The water curtain is off or stuck open: Ensure the water curtain is installed and swinging freely. * The ice machine is not turned on: Press the power button; the display must indicate “Making Ice.” * For IB Models Only - The dispenser ice level thermostat is open: Adjust the thermostat to maintain the correct dispenser level.
D
David ThompsonAug 20, 2025
How to fix a Manitowoc Ice Maker that is not releasing ice?
- D
  davidpowellAug 20, 2025
  If your Manitowoc Ice Maker is not releasing ice or is slow to harvest, several factors could be responsible. Start by descaling and sanitizing the ice machine, as it might be dirty. Ensure the ice machine is level. The air temperature around the ice machine head section must be at least 35°F (2°C). If the fan cycle control isn't de-energizing the condenser fan motor, call for service. Check if the water regulating valve is incorrectly adjusted or won't close; if water is present at the condenser drain outlet during the harvest cycle, contact a qualified service company to adjust or replace the valve.