EasyManuals Logo

Manitowoc Indigo NXT Service Manual

Manitowoc Indigo NXT
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
Part Number 000014141 Rev 08 5/21 43
Descaling and Sanitizing
General
You are responsible for maintaining
the ice machine in accordance with the
instructions in this manual. Maintenance
procedures are not covered by the
warranty.
Descale and sanitize the ice machine every
six months for efficient operation. If the ice
machine requires more frequent descaling
and sanitizing, consult a qualified service
company to test the water quality and
recommend appropriate water treatment.
An extremely dirty ice machine must be
taken apart for descaling and sanitizing.
Manitowoc Ice Machine Cleaner/Descaler
and Sanitizer are the only products
approved for use in Manitowoc ice
machines.
Ice Machine Inspection
Check all water fittings and lines for leaks.
Also, make sure the refrigeration tubing
is not rubbing or vibrating against other
tubing, panels, etc.
Do not put anything (boxes, etc.) in front of
the ice machine. There must be adequate
airflow through and around the ice
machine to maximize ice production and
ensure long component life.
Exterior Cleaning
Clean the area around the ice machine as
often as necessary to maintain cleanliness
and efficient operation.
Wipe surfaces with a damp cloth rinsed
in water to remove dust and dirt from the
outside of the ice machine. If a greasy
residue persists, use a damp cloth rinsed in
a mild dish soap and water solution. Wipe
dry with a clean, soft cloth.
The exterior panels have a clear coating
that is stain resistant and easy to clean.
Products containing abrasives will damage
the coating and scratch the panels.
Never use steel wool or abrasive pads for
cleaning.
Never use chlorinated, citrus based or
abrasive cleaners on exterior panels and
plastic trim pieces.
Remedial Cleaning Procedure
This procedure descales all components
in the water flow path, and is used
between the bi-yearly detailed descaling
and sanitizing procedure.
Detailed Descaling/Sanitizing Procedure
This procedure must be performed a
minimum of once every six months.
The ice machine and bin must be
disassembled descaled and sanitized.
All ice produced during the descaling and
sanitizing procedures must be discarded.
Section 4
Maintenance

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitowoc Indigo NXT and is the answer not in the manual?

Manitowoc Indigo NXT Specifications

General IconGeneral
ModelIndigo NXT
CategoryIce Maker
Energy EfficiencyENERGY STAR Certified
Cooling SystemAir-cooled or Water-cooled
Voltage208-230V/60Hz/1ph
TypeModular
Ice ProductionVaries by model
Water Connection3/8" OD Tubing
Power RequirementsVaries by model
WeightApproximately 210 lbs
Ice TypeNugget Ice

Related product manuals