Need help?Do you have a question about the Manitowoc NEO UY0240A and is the answer not in the manual?
General| Model | NEO UY0240A |
|---|---|
| Type | Undercounter Ice Maker |
| Ice Production | 240 lbs per day |
| Ice Type | Half Dice |
| Weight | 130 lbs |
| Condenser Type | Air-Cooled |
| Voltage | 115V |
| Ice Storage | 80 lbs |
| Water Connection | 3/8" FPT |
| Power Supply | 115V, 60Hz |
| Width | 24 inches |
| Ice Storage Capacity | 80 lbs |
Lists specific Manitowoc ice machine models covered by this manual.
Describes optional accessories like Bin Caster and Water Filter System.
Explains the growth inhibitor feature using a UV bulb.
Details steps for cleaning up broken UV bulbs.
Lists critical safety warnings for electrical, lifting, and operation.
General guidelines and warnings for electrical service installation.
Specifies allowable voltage variations for the ice machine.
Details requirements for providing a separate fuse or circuit breaker.
Explains ampacity for selecting electrical supply wire size.
Discusses GFCI/GFI protection and Manitowoc's recommendation.
Lists criteria for selecting the proper location for the ice machine.
Provides BTU/Hour heat rejection data for different models.
Step-by-step instructions for leveling the ice machine.
Guidelines for water supply, including treatment and pressure.
Instructions for installing water inlet lines, avoiding hot water.
Guidelines for installing drain lines to prevent backflow.
Specific requirements for water-cooled models using cooling towers.
Table detailing electrical requirements for various models.
Pre-operation checks and a checklist for proper installation.
A detailed checklist of items to verify before operation.
Details water temp, pressure, fittings, and tubing sizes.
Instructions on how to adjust the ice thickness setting.
Diagram illustrating water and drain connection points.
Explains the functions of touch pad buttons and indicator lights.
Details the operation of the On/Off button for starting/stopping ice making.
Describes how to use the delay feature to postpone ice making.
Instructions for initiating and managing the cleaning cycle.
Explains the function of the Bin Full indicator light.
Indicates when the service light is on and where to find info.
Outlines the step-by-step process of how the ice machine makes ice.
Explains the built-in safety limits that can stop the ice machine.
General guidance on cleaning the ice machine every six months.
Step-by-step instructions for cleaning and sanitizing.
How to start, stop, and pause the cleaning cycle.
Instructions for removing specific parts for cleaning.
Steps for removing float switches and brackets.
Instructions for removing the water trough.
Steps to remove the ice damper and bin switch cover.
Instructions for removing the water distribution tube.
Procedure for cleaning between bi-annual cycles.
Guidance on inspecting water fittings, lines, and tubing.
How to clean the outside of the ice machine.
Instructions for cleaning the condenser.
Steps for safely removing the ice machine from service.
A checklist for common ice machine problems and their solutions.
Explains how to reset the ice machine when a safety limit is triggered.
Details the terms and conditions of the commercial warranty.
Outlines warranty coverage and exclusions for residential units.
To Next Page
