EasyManuals Logo

Manitowoc Q270 series User Manual

Manitowoc Q270 series
236 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #46 background imageLoading...
Page #46 background image
46 Part Number 80-01111-9 7/10
Step 1 Set the toggle switch to the OFF position after
ice falls from the evaporator at the end of a Harvest
cycle. Or, set the switch to the OFF position and allow
the ice to melt off the evaporator.
Step 2 Remove all ice from the bin.
Step 3 To start a cleaning cycle, move the toggle
switch to the WASH position.
Step 4 Add the proper amount of Manitowoc Ice
Machine Cleaner to the water trough.
Step 5 Wait until the clean cycle is complete
(approximately 22 minutes) then place the toggle
switch in the OFF position, disconnect power and
water supplies to the ice machine.
Never use a nything to force ice fro m the
evaporator. Damage may result.
Model Amount of Cleaner
QM45 1.5 ounce (45 ml)
Q130 1 ounce (30 ml)
Q170 2 ounces (60 ml)
Q210 2 ounces (60 ml)
Q270 2 ounces (60 ml)
! Warning
Disconnect electric power to the ice machine
at the electric switch box before proceeding.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitowoc Q270 series and is the answer not in the manual?

Manitowoc Q270 series Specifications

General IconGeneral
BrandManitowoc
ModelQ270 series
CategoryIce Maker
LanguageEnglish

Related product manuals