Mannesmann Rexroth A10VO Series - User Manual

RDE 92 711-02-R 01.95
R
Reparaturanleitung
Repair Instructions
Baureihe 31 / Series 31
Nenngrößen 18...140
Sizes 18...140
* auch für
A10 VO ( s. S.2 )/
if its A10 VO see
page 2
A10VSO*
Brueninghaus Hydromatik

Summary

Ersatzteil-Kits; Spare Part Kits

Overview of Spare Part Kits K1-K5

Overview of Spare Part Kits K6-K10

Antriebswelle Abdichten; Sealing the Drive Shaft

Drive Shaft Seal Replacement Procedure

Step-by-step instructions for removing and replacing the drive shaft sealing ring.

Demontage und Montage der kompl. Einheit; Disassembly and Re-assembly of the Complete Unit

Disassembly of the Complete Unit

Detailed steps for disassembling the hydraulic pump unit.

Re-assembly of the Complete Unit

Key steps for re-assembling the hydraulic pump unit, with critical notes.

Ersatzteil Kit: A10 Steuerventil DFR; Spare Part Kit: A10 Control Valve DFR

Zerlegen und Reinigen des Steuerventils; Disassembling and Cleaning the Control Valve

Control Valve Disassembly and Cleaning

Step-by-step guide for disassembling and cleaning control valve components.

Control Valve Re-assembly and Adjustments

Einstellhinweise; Testing and Set-up Instructions

Mannesmann Rexroth A10VO Series Specifications

General

Series	A10VO
Fluid	Hydraulic Oil
Circuit Type	Open Circuit
Displacement	28 ... 140 cm³/rev
Maximum pressure	350 bar
Maximum speed	3000 rpm
Weight	Approx. 25 kg
Operating temperature	-20°C to +80°C
Control type	Pressure control (DR, DRG)