Operating Manual
PR-050823-0121 Version 161109 7 of 14
Make sure that there is no trapped liquid or excessive pressure behind the tank unit
when connecting. Do not use external tools to make a connection.
Authorized and qualified personnel must carry out all assembly and maintenance
operations as described in this operating manual.
3 T
RANSPORT AND
S
TORAGE
The product may only be transported or stored absolutely clean. Suitable protection must be used for both
openings to ensure no damage occurs to the surfaces/sealed areas. The storage location must guarantee
adequate protection from corrosion or extreme temperatures.
3.1 D
ELIVERY
C
HECK
• Check for any transportation damage. If so report this immediately to the forwarder.
• Check that the products and quantities are in accordance with the delivery note.
3.2 C
OMPLAINTS
/
R
ETURN OF GOODS
• If returning goods please contact Mann Teknik AB to receive a Complaint Report form.
• Complete the form with as much details as possible.
• Return the goods with the Complaint Report attached on the outside of the package!
3.3 S
TORAGE
Store coupling in a dry, dust free, dark place, in ambient temperature.
4 I
NSTALLATION
4.1 I
NITIAL
O
PERATION
The correct installation of all MannTek products is essential to ensure safe and satisfactory operation.
Checks should be made to ensure that the fitting of MannTek products does not interfere with the correct
operation of affiliated equipment (i.e. isolation valve, excess flow valves, etc). Before securing the flange or
thread connections to mating equipment (i.e. hose, loading arm and storage tank) ensure that no foreign
objects, dirt, grit, water (moisture) etc. are present in the coupling.
All flange and thread connections should be made without imparting excessive strain to the equipment. All
gaskets and sealing materials used to make the permanent connection should be of suitable material.
To Next Page
Loading...