EN
Download the FLINSTON GO app for more
convenient vehicle operation.
Search for FLINSTON GO in the APP Store or GOOGLE
Play and download the app to your smartphone.
CHARGING METHOD
1.
The connection point of the
charger
is located in the marked
location
(see figure).
2.
Plug the charger cord into the hole
(make sure the components are dry).
3.
The charger light will illuminate red while charging. When the color turns
green, the
battery has been fully charged and the charger must be unplugged, otherwise the
battery life will be negatively affected.
4.
Finish charging by covering the charging port to protect it from moisture.
SAF
ETY RECOMMENDATIONS WHEN CHARGING
Charge the battery for at least 6-7 hours before first use. To maximize battery life,
you should charge it at least once a month or after two days of riding. Please charge
the battery at the correct temperature. Not lower than 0 degrees Celsius. If the
battery is not charged in a timely manner, there is a risk of damaging it. A full
discharge of the battery risks reducing its lifespan.
Please use only original batteries, chargers and cables, protect the battery from
overcharging. Please ensure that the charger wires are properly connected and
charging is done in a well-
ventilated environment. The charger should be used in a dry
environment. Do not allow the charger or cords
to come into contact with water, as this
may result in an electric shock. Do not
touch the appliance with wet hands. If any error
occurs during charging, please disconnect the charger from the power supply
immediately.
5
To Next Page
Loading...
