EN
The battery and
power equipment cannot be disposed of with household waste, we
respect your contribution to the environment through the use of electric vehicles,
which allows you to reduce the amount of exhaust fumes. Please hand over the e-
scooter and any relevant components (battery) for disposal at the appropriate
problem waste collection facility. Please refer to the current regulations. If you
have any questions, you can contact your distributor or after-sales service.
FILLING AND CHANGING THE TIRE
If you notice low tyre pressure, or if the pressure in each tyre
is different, fill it with
air. The air pressure in both tyres
should be the same. The default pressure in the front
wheel is 2.8 Bar, in the rear wheel
2.5 Bar. If you need to change a tire due to a
puncture, please contact
your representative or service department
DISC BRAKE MAINTENANCE
Unscrew the fixing screw with an M4 wrench, unscrew
the screw in a clockwise direction, screw it in the
opposite direction. First
, turn the wrench slightly
to the left to loosen the brake. Hold the brake
with your hand, pressing against the rear brake
pad while attaching. Turn the M4 wrench
clockwise until the brake is securely
in place.
Release the brake so that it automatically returns to
its original position. Make sure that
there is no
friction of the brake pad during normal wheel
rotation.
WARRANTY
The following situations are not covered by the warranty:
Connector damaged by user action.
Over standard
Consumption.
Failure or destruction caused by a natural disaster (e.g. fire,
earthquake, etc.) or
force majeure (lightning strike).
Damage caused after the warranty period User interference in the
Construction of the device.
To Next Page
Loading...
