8
Key functions
video / camera / playback mode
Power button:
Long press: Power on/off
Quick press: Sound off
OK button: Video on/off
Up
Down
Mode: camera /video /recording /playback function switch
Option: Quick press: menu SOS function on (video)
Note:“
” Switch button “ ” Video button ”
Menu setting
System setting
Press Switch button, press Menu in camera mode then go to the settings, choose
Video setting press Video button to confirm
1．Video mode setting: 1080FHD，1080P, 720P, WVGA, VGA
2．The exposure value: -2.0 to +2.0
3．Time: recording time on/ off.
4．Motion Detection: on / off, select "On", press the "Video" button to start
motion detection, if the objects move, then the machine will automatically begin
recording, 2 minutes for a file, after 2 minutes if there is no subject movement, the
machine is in motion detection standby sleep mode, when the objects move, it begins
recording again.
5．Cycling recording: Select turn on or off the cycling camera function; The length
of time: 1minutes, 2 minutes, 3minutes
6．Motion detection sensitivity: divided into high (sensitive), standard (General),
low (less delay)
7．Video sound: on / off, refers to video with sound or without sound
8．G-sensor gravity sensing function is divided into high (sensitive), standard
(General), low (less delay)
Press "OK" button to confirm, to complete the setup, press "Menu" to exit.
Camera Settings
"Switch" button to turn on the machine, press the "mode" button to enter the camera
mode from video mode, select "Menu" to enter the menu setting
1. Image size: 12M,10M,8M,5M,3M,2MHD,VGA,1.3M
2. Image Quality: High / Standard / Economy
User’s Manual EN
To Next Page
Loading...
Need help?
General