User’s Manual EN
7
Product Structure:
1) MIC 2）Holder slot 3）Reset port 4）Power button 5）Display screen
6）Indicator light 7）menu button 8）up button 9） OK button 10）down button
11）Mode button 12）HDMI output port 13）TF card slot 14）Power switch
15）LED 16）Lens 17）Speaker
Charge: In the previous three times of charging, please charge when the battery is
totally off, keep charging for 12 hours for maximum performance of the battery.
This product built-in Lithium polymer battery, please charge first time you use:
1) Connect to the computer, use the USB transmission line.
2) Use the charger, connect the USB line with the charger, then plug the charger to the
mains socket.
3) The original round car charger (Please use the original charger provided by our
company)
Note: When red light shows the battery is running out, the product will directly go into
the protected status which cannot be turn on, meanwhile please charge for it.
GuidelineCam on and off mode switching
1．Shortly press the " Power" button, power on
2．When the power is on default video mode, press “confirm” then start to
record, press "Video" button to pause and automatically save
3．If you need to switch mode, pause the camera, and press mode to switch to
camera mode.
4．Pause the camera, long press the "Power" button for three seconds to shut
down.
To Next Page
Loading...
Need help?
General