10
CONNEĄING
1. This set applies to AC 110V-240V, 50/ć0Hz
2. AC power: battery can be charged when conneąed to AC power. Red light on battery is
charging, it will change to green once battery complete charge.
3. Internal battery will be charged even device switch o when plugged in to AC power
4. Adjust funąion keys to your personal audio preference.
TWS CONNEĄION
STEP 1 Push the Mode Button on both speakers until speakers are in Bluetooth Mode.
Screen will display the word “BLUE”.
STEP 2 When both speakers are in Bluetooth mode, push and hold the TWS button
for 3 seconds. You will hear a beep & screen display “bt/btst”. Next time you put both
speakers in Bluetooth mode at the same time, speakers will conneą automatically.
STEP 3 On your device, turn your Bluetooth settings “ON”, you will then seleą the unit
and pair. Enjoy TWS (True Wireless Stereo) sound from your phone via Bluetooth!
BLUETOOTH INSTRUCTION
Change the mode into „BLUE”, the bluetooth sign light twinkles, and speaker will give an alarm.
Ensure you enable the Bluetooth function on your Bluetooth device. Search for Bluetooth
connection until you nd device model and pair.
BATTERY & CHARGING
1. The units takes approximately 5 hours to fully charge. It will automatically begin charging
once the power cord is connected.
2. If the battery power is low may caused sound distortion or stop play, pls charging the
battery on time.
3. To maximize the battery’s lifespan, please charging the battery immediately. When the
unit is not used for prolonged periods of time, the battery will gradually lose its power. It
is recommended to fully charge the battery at least every 30days.
4. To saving battery, please power o once stop using.
To Next Page
Loading...
Need help?
General
