MantelMount MM860 User Manual

MM860 Installation Instructions
Please read this entire manual before you begin.
Do not unpack any contents until you verify all requirements on PAGE 3.
If you have any questions, visit MantelMount.com or call (800)-897-9755.
This product contains small parts that can be a
choking hazard. Do not let children play with any of
these small parts! Keep children away from the work
area during installation.
Do not use this product in any way, or for any
purpose, that is not specifically described in these
instructions. MantelMount is not responsible for
damage or injury caused by incorrect installation
or improper use.
MantelMount has three different adjustments
that must be made after the installation is
complete in order to operate properly.
IMPORTANT:
This product is intended to be installed by
professional installation contractors, or persons
familiar with the tools and methods required for
this installation. If you are not sure about your
ability to perform this installation, you must
contact a professional. MantelMount is not
responsible for damage or injury caused by
incorrect installation or improper use.
!
CAUTION:
!
CAUTION:
!
WARNING!
Do not let children operate, pull on, or hang from
MantelMount.
Do not operate MantelMount when anyone is near or
behind the mount. MantelMount is very strong and can
result in crushing injuries.
!
WARNING!
!
WARNING!
Exceeding the weight capacity can result in
serious personal injury or damage to equipment!
The combined weight of all components must not
exceed 125 lbs (57 kg).
MantelMount must be installed to a wall or structure
that is able to hold five times the combined weight of
all equipment. If you are unsure about your structure,
a contractor must evaluate your installation.
!
WARNING!
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
MantelMount MM860 PAGE 1
www.MantelMount.com
The bottom travel stop is adjusted
with two screws and locknuts so
the TV and mount do not lower all
the way into the mantel.
Tilt and yaw are removed using
four screws behind the swivel
mechanism. The TV should always
be flat to the wall when stowed.
The side-to-side swivel stops are
adjusted with two screws with
locknuts so that the TV does not
swivel into the mantel.
U.S. Pat. No. 8,864,092
Other Patents Pending

MantelMount MM860 Specifications

General

Weight Capacity	125 lbs
Counterbalance Adjustment	Yes
Heat Sensing Pull-Down Handles	Yes
Paintable Covers	Yes
Construction Material	Steel
Color	Black
VESA Compatibility	200x200 to 600x400
Screen Size Compatibility	42" to 86"
Installation Type	Wall mount
Tilt Range	5° forward, 15° backward

Summary

Safety Guidelines and Installation Requirements

General Safety Warnings and Cautions

Essential safety precautions, warnings about hazards, and installation cautions.

Critical Site and TV Requirements

Verification of fireplace, wall structure, and TV specifications before installation.

TV Bracket Attachment and Mount Preparation

Selecting TV Brackets and Hardware

Choosing correct screws, spacers, and identifying TV back type.

Attaching Brackets to TV

Mounting vertical braces, extenders, and horizontal brace to the TV.

Determining Lift Housing Height

Calculating vertical position for lift housing based on mantel depth.

Remote Control Pairing and Verification

Pairing the remote control and confirming its proper operation for the mount.

Mount Installation and Operational Adjustments

Optional Installation Features

Utilizing ALPS, hard wire conduit, and 2x4 bracing options for installation.

Mounting Configurations

Surface mount, recessed mount, and other installation options.

Installing Lift Housing and Setting Stops

Mounting the lift housing and adjusting hard/soft travel stops for safe operation.

TV Alignment and Memory Settings

Adjusting TV parallelism, setting memory positions, and utilizing the heat monitor.

Network Connectivity and Software Configuration

Network Connectivity Options

Connecting via LAN, WiFi, or directly to a PC for setup.

MM860 Utility Software and Updates

Using the utility software for configuration, firmware updates, and ALPS settings.

Product Features and Warranty Information

Exclusive MantelMount Technologies

Overview of ALPS, ARHM, and MACH patented technologies.

Warranty and Customer Support

Details on product warranty, repair, and customer service contact information.