Mantra MFS110 User Manual

Mantra Softech is a Global Hi-Tech Manufacturer of Biometric Products and
Solutions. We Offer a Wide Range of Products in Biometric and RFID Industry.
Optical Fingerprint Scanner
MFS110
1. Do not attempt to disassemble the sensor.
4. Do not clean the sensor with strong chemicals or acids.
7. Do not operate the sensor beyond its operating voltage.
2. There are no user serviceable parts inside.
5. Do not operate the sensor beyond its operating temperature.
3. Do not expose or operate the sensor to rain or moisture.
6. Do not operate the sensor beyond its operating humidity.
Safety Precautions
MANTRA SOFTECH (INDIA) PVT. LTD.
ISO 9001:2015 CERTIFIED COMPANY
Support / Service Email
On Call Support & Service
Download Drivers & SDK
http://download.mantratecapp.com
http://servico.mantratecapp.com
Cell: 079-49068000 (Press 1 for support services )
servico@mantratec.com
RMA Support
What’s in the box?
1. MFS110
2. Cleaning Cloth
Consumer Notices
FCC NOTICE : This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, & can
radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures: (1) Reorient or relocate the receiving antenna; (2)
Increase the separation between the equipment and receiver; (3) Connect the
equipment into an outlet on a circuit different from that to which the receiver is
connected; or (4) Consult the dealer or an experienced radio/TV technician for
help. Changes or modifications not expressly approved by the party
responsible for compliance to Part 15 of the FCC Rules could void the user's
authority to operate the equipment.
CE NOTICE : This equipment has been tested and found to comply with the limits
for a Class B or Class 2 digital device, pursuant to EN 55032 & EN 55035 Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at the expense of the user. Changes or
modifications not expressly approved by the party responsible for compliance to
EN 55032 & EN 55035 Rules could void the user's authority to operate the
equipment. This Class B digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.

Mantra MFS110 Specifications

General

Resolution	500 DPI
Interface	USB 2.0
Operating Temperature	0°C to 50°C
Sensor Type	Optical
Operating Humidity	20% to 80% (non-condensing)
Power Supply	5V DC via USB
Operating Systems Supported	Windows, Android

Summary

Consumer Notices and Safety Precautions

FCC Compliance Statement

Details equipment tested for Class B digital device compliance with FCC rules for radio frequency energy.

Safety Precautions for Sensor Operation

Lists crucial safety guidelines for handling and operating the fingerprint sensor to prevent damage or malfunction.

CE Compliance Notice

States compliance with EN 55032 & EN 55035 Rules for digital devices in commercial environments.

Product Introduction and Handling

MFS110 Introduction

Describes the MFS110 as a high-quality USB optical fingerprint sensor for biometric security.

Operating and Handling Instructions

Provides essential guidelines for proper handling, cleaning, storage, and operation of the fingerprint sensor.

Finger Placement for Scanning

Finger Height Alignment

Instructs to align the center of one phalanx with the sensor center for optimal scanning.

Finger Angle Alignment

Specifies that the finger must be placed parallel to the sensor's sides.

Finger Inclination Alignment

Requires the finger to be positioned parallel to the sensor's surface.

Finger Rotation Alignment

States that the finger should be parallel to the sensor's surface when rotating.

Warranty Terms and User Rights

Warranty Coverage and Limitations

Details warranty terms, repair processes, liability limits, and conditions for repair or replacement.

User Rights and Obligations

Outlines user guarantees regarding legal use of the product and liability for violations.