Marantec M13-631 - User Manual

USER INSTRUCTIONS EN
Wireless Keyless Entry System M13-631 (Keypad)
Technical Details
Frequency: 315 MHz
Modulation: ASK
Telegram: 24 Bit
Channels: 5 (4 function channels
and 1 unsecured light channel)
Communication: uni-directional
Power Supply : 2x AAA batteries
Operating mode: IMPULS, Direction
Construction
1 Slider
2 LEDs
3 ENTER button
4 LIGHT button
5 Holder
Safety Advice
Read carefully through these instructions before installing and operating the unit!
Observe the applicable laws, standards and regulations as well as the manufacturer's instructions for the devices to be operated!
Have faulty units checked by the manufacturer!
Do not make any unauthorized alterations or modifications to the unit!
The manufacturer does not assume any liability for damage caused as a result of improper or non-intended use!
Changes or modifications not expressly approved by the party responsible for compliance could void the user´s authority to operate the equipment.

Summary

User Instructions

Technical Specifications

Details frequency, modulation, power supply, and communication protocols for the wireless entry system.

Keypad Construction Overview

Identifies the physical components of the M13-631 keypad, including slider, LEDs, and buttons.

Safety Advice

Product Statements and Features

Compliance Statements

Outlines FCC and Industry Canada compliance, subject to specific conditions regarding interference.

Personal Identification System

Details PIN storage, usage, and activation for garage door opener control, including temporary PINs.

Keypad Functions

Explains features like one-button-close, keypad illumination, light function, and low-battery checks.

Programming and Settings

Covers transmitter programming, low-battery indication, and default factory settings for the keypad.

Regular Operation Guide

Keypad Activation and Lighting

Details how to turn on the keypad and its illumination, including low battery warnings and indicator lights.

Controlling External Devices

Explains the process for switching external lighting on/off using the LIGHT and ENTER buttons.

Door Access Control

Outlines the procedure for operating the garage door, including PIN entry, error handling, and lockout mechanisms.

One-Button-Close Functionality

Describes how to use the one-button-close feature for simultaneous door closure and its activation requirement.

Programming Procedures

Transferring Transmitters and Allocating PINs

Guides users through pairing a transmitter and assigning a new PIN, including overwriting existing ones.

Modifying Existing PINs

Details the process for changing a current PIN, including validation and error feedback.

Creating Temporary PINs

Explains how to generate a temporary PIN, set its usage limit, and cancel it.

Advanced Functions and Reset

Connecting Transmitters to Light Function

Outlines the process to associate a transmitter with the keypad's light control feature.

Managing One-button-close Function

Details the steps for activating and deactivating the one-button-close feature for simultaneous door operation.

Keypad Reset Procedure

Explains how to perform a factory reset, restoring default PINs and settings.

Marantec M13-631 Specifications

General

Brand	Marantec
Model	M13-631
Category	Remote Starter
Language	English