Need help?Do you have a question about the Marantz 4100 and is the answer not in the manual?
General| Type | Stereo Amplifier |
|---|---|
| Power Output | 30 watts per channel into 8Ω (stereo) |
| Frequency Response | 10Hz to 60kHz |
| Total Harmonic Distortion | 0.1% |
| Damping factor | 50 |
| Input Sensitivity | 1.8mV (MM), 180mV (line) |
| Signal to noise ratio | 76dB (MM), 86dB (line) |
| Speaker load impedance | 4Ω to 16Ω |
| Dimensions | 17.5 x 14.5 x 5.5 inches |
| Weight | 10.5kg |
| Channel Separation | 50 dB |
How 2-channel stereo input signals are converted into quadraphonic signals.
Decoding compatible stereo-quadraphonic records using the SQA-1 adapter.
Checks for shorted components and faulty rectifiers causing high power draw.
Checks for shorted L001 and open rectifiers causing no operation.
Checks filter capacitors and related components for noise issues.
Checks for defective capacitors potentially causing oscillations.
Initial setup steps and checks before performing performance verification.
Procedure to test for and measure hum and noise levels.
Procedure to measure the maximum power output of the amplifier.
Procedure to measure the harmonic distortion levels.
Specifications related to audio input, output, and frequency response.
Specifications for power requirements, consumption, dimensions, and weight.
To Next Page
