Why is there no sound coming from the surround speakers on my Marantz Tuner?
If there is no sound from the surround speaker, check these items: * Ensure the surround output cable connection is complete. * If STEREO has been selected for Surround mode, no sound will be output from the surround speaker; set another Surround mode. * Make sure that Surround = NONE has been selected in SETUP mode; make the correct setting.
What to do if I cannot get programmed station when pressing PRESET button on Marantz Tuner?
If you cannot get a programmed station when pressing the PRESET button, the preset data may have been erased. Disconnecting the power plug for long periods can erase this data. If this happens, input the preset data again.
Why can't I play DTS sources on my Marantz Tuner?
If DTS sources cannot be played, it may be because the Surround mode is set to DOLBY, or the player does not respond to DTS digital out. Select another mode. Use a player which responds to DTS-digital out.
Why can't I play normal PCM signals (CD or laser disc) on my Marantz AV9000?
If a normal PCM signal (CD or laser disc) cannot be played, it may be because the Surround mode is set to DTS-cinema or DTS-music. Select another mode.
Why can't I play Dolby Digital signals on my Marantz AV9000?
If a Dolby Digital signal cannot be played, it may be because the Surround mode is set to DTS-cinema or DTS-music. Select another mode.
Why is there no output to the Sub Woofer Out on my Marantz AV9000?
If there's no output to the Sub Woofer Out, check if 'Sub-woofer = NONE' has been selected in SETUP mode. If so, select 'Sub-woofer = YES'.
General| Signal-to-Noise Ratio (AM) | 50 dB |
|---|---|
| Type | Tuner |
| Tuning range | FM, AM |
| Tuning Range (FM) | 87.5 to 108.0 MHz |
| Tuning Range (AM) | 520 - 1710 kHz |
To Next Page
