Power does not turn on / Power is turned off
Power is not turned on.
0
Check whether the power plug is correctly inserted into the power outlet. (v p. 35)
0
This unit is in standby mode. Press the X button on the main unit or the CD X button on the remote control. (v p. 37)
Power automatically turns off.
0
The sleep timer is set. Turn on the power again. (v p. 90)
0
“Auto-Standby” is set. “Auto-Standby” is triggered when there is no operation for a set amount of time. To disable “Auto-Standby”, set “Auto-Standby”
on the menu to “Off”. (v p. 103)
0
“HDMI Power Off Control” is set. The power of this unit turns off (standby) by linking to the power off operation of an HDMI connected TV. To disable
“HDMI Power Off Control”, set “HDMI Power Off Control” on the setup menu to “Off”. (v p. 102)
When the power is turned on, the protection circuit indicator flashes in orange.
0
The protection circuit has been activated due to an error in the internal power supply. Unplug the power cord and contact our customer service center.
Contents
Connections Playback Settings Tips Appendix
115
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
