Playing files stored on USB flash drives
1
Insert the USB flash drive into the USB port.
2
Press USB to switch the input source to “USB Music”.
0
You can also press R (HEOS Music). Use Cursor Up/Down
buttons to select “USB Music”, then press ENTER.
3
Select the name of this unit.
4
Browse the music on your USB flash drive and select
something to play.
0
When you select something to play you will be asked how you want to
queue up your music.
Play Now:
Inserts the item into the queue after the
currently playing track and plays the
selected item immediately.
Play Now & Replace
Queue:
Clears the queue and plays the
selected item immediately.
Play Next:
Inserts the item into the queue after the
currently playing track and plays it when
the currently playing track ends.
Add to End of Queue: Adds the item to the end of the queue.
5
Use Cursor Up/Down buttons to select the “Play Now”
or “Play Now & Replace Queue”, then press ENTER.
Playback starts.
Contents
Connections Playback Settings Tips Appendix
45
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
