Listening to audio on Bluetooth
headphones
1
Set “Headphone” to “On” from the “Network” -
“Bluetooth” setting in the setup menu. (v p. 106)
2
Enter pairing mode on the Bluetooth headphones you
want to connect to this unit.
3
Select “Devices” and select the name of the Bluetooth
headphones from the device list.
4
Adjust the volume of connected Bluetooth headphones
after the connection is completed.
0
A2DP profile-compatible Bluetooth speakers can be connected following the same
steps used to connect Bluetooth headphones.
NOTE
0
Bluetooth headphones volume cannot be adjusted from this unit. Adjust volume of
your Bluetooth headphones.
0
Audio may be delayed when sent over Bluetooth.
0
AirPlay audio cannot be transmitted.
0
Bluetooth headphones cannot be connected when use a Bluetooth input source.
Furthermore, selecting a Bluetooth input source will terminate the connection
between this unit and Bluetooth headphones.
0
Bluetooth headphones cannot be connected when this unit is grouped in the
HEOS app.
0
Bluetooth headphones cannot be connected if a HEOS built-in device is playing an
input source from this unit.
CAUTION:
Using Bluetooth headphones without a volume adjustment
function
0
In order to avoid hearing loss, do not connect Bluetooth headphones
that lack volume adjustment functionality.
0
Bluetooth headphone volume may be unexpectedly loud when this
unit connects to Bluetooth headphones.
0
Bluetooth headphone volume cannot be adjusted from this unit.
Contents Connections Playback Settings Tips Appendix
52
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
