CONNECTIONS
The numbers between parentheses refer to the fold-out illus-
tration.
This CD Recorder can be used to record directly or through a
(pre-) amplifier from any digital or analog audio source.
In addition, the unit can be used as a regular CD player. Read how
to connect the CD Recorder based on the possibilities your other
audio equipment offers.
Please refer to the operating instructions for your other audio equip-
ment first.
The following options are available:
– Cinch (RCA) analogue connections
– XLR analog connections
– digital connections
– optical connections
Cinch (RCA) analog connections
1 For recording and playing, connect (using the enclosed cable
with red and white plugs) the CD Recorder to a source based
on the following diagram:
2 Analog input select switch (22) selects Cinch (RCA).
XLR analog connections
1 For recording, connect (using analog balanced cables) the CD
Recorder to a source based on the following diagram:
2 Analog input select switch (22) selects XLR.
3 Input level select switch (21) choose either -10dBu or +4 dBu.
Digital connections
1 For recording and playing, connect (using the enclosed cable
with black plug) the CD Recorder to a digital amplifier based on
the following diagram :